Block Paving

Block Paving

Whether you’re decorating your yard or re-doing the driveway, it can be extremely helpful to know the best ways to lay block paving. By taking the Do It Yourself strategy, you could produce exactly what you want and save yourself a fair quantity of money– something your bank balance will most likely thank you for. All you should do is obtain the right tools and read this overview.

Plan Exactly How You Want It

The initial step is to choose just how you want your block paving to look. If you’re replacing old paving, exactly what didn’t you like regarding it? What enhancements could you make? You need to consider the general shape, useful aspects (such as dimension) and pattern of the bricks. It’s likewise a smart idea to think about what colour bricks will best go with your residence– you do not want anything to clash.


Next off, you’re going to wish to prepare the site. Mark out an area and dig it out, making certain to dig far enough down so that your paving will be despite having the surrounding surface. For this, you need to use plant devices such as a miniature excavator or a JCB.

Produce The Sub-base

Produce a sub-base to form the foundations of your block paving. Your sub-base must be at the very least 100mm thick, and it can be a great idea to place it above a layer of weed-fabric, to stop weeds from growing with your sidewalk. Complete your sub-base by going over it with a vibrating place. This will certainly squash it down and level it.

Produce Sturdy Edge Restraints Place edge restraints to define the edge of your paving. They need to be firm and helpful as the outer area is the weakest part of the paving. They will likewise work as an overview for the shape of your block paving.

Screeding Your Area

Next off, you’ll have to screed the area, including in the structures and making a rank surface for the paving to sit on. Place about 50mm of somewhat wet sharp sand down and use a shaking plate once more to smooth and establish. Then take down a 2nd layer, all the same as the first.

Laying Your Block Paving

Finally, you could begin putting down your bricks. For the best surface, start below an incline and move up. The joints of the bricks should overlap– similar to in a wall– so you’ll be left with voids that you’ll need to fill in with cuts of brick. When your block paving is down and all the brick are correctly placed, sweep some kiln dried sand over the surface. This will load the gaps between the joints.

See, not as well challenging! Block paving is actually very very easy, and can offer you outstanding outcomes if done right. As soon as you have actually completed, take your time to unwind and admire all your effort- you deserve it!

Louella Carr